Description

<style>.e_editor{font:14px/24px Arial,'microsoft yahei','Times New Roman','b8bf53';}.e_editor div,e_editor p,e_editor td,e_editor th,e_editor li{font-weight:inherit;font-size:inherit;font-style:inherit;font-family:inherit;}.e_editor ul{margin:-10px 0 20px;}.e_editor li{padding:5px 0;}.e_table{width:96%;border-collapse:collapse;empty-cells:show;}.e_table th,.e_table td{padding:5px;border:2px solid #eee;}.e_img{padding:10px 0;text-align:center;}.e_p{line-height:20px;padding:0 0 20px;text-indent:0em;}</style> <div class="e_editor"> <div class="e_p"> Most of you know about Connora Technologies' (Hayward, CA, US) <strong>RECYCLAMINE</strong> hardener for epoxy resins that enables recycling of thermoset composites <strong>without</strong> pyrolysis. (If not, read my blog "Connora makes epoxy truly recyclable".) This is achieved by designing the thermoset cross-links to be broken, which converts the <strong>epoxy into long polymer strands</strong>, a.k.a. thermoplastic epoxy. Thus, not only can the fibers be captured without chopping or shredding, the <strong>resin is also recovered</strong> for reuse. </div> <div class="e_p"> <table> <tbody> <tr> <td> </td> </tr> <tr> <td> </td> </tr> </tbody> </table> <div class="e_p"> Great. But does it really work? According to work published by two separate groups in 2016: <strong>Yes</strong>. </div> <div class="e_p"> Connora had already presented work in 2013 and 2014 ("Recyclable by Design: A Chemical Approach to Recyclable Epoxy Composites,"CAMX 2014) that explored how RECYCLAMINE works in composites and post-recycled fiber performance. Though RECYCLAMINE can be used in a <strong>variety of processes</strong> (infusion, filament winding, etc.), the 2016 presentations mainly demonstrated RECYCLAMINE in <strong>high-pressure resin transfer molding</strong> (HP-RTM) and characterized laminates made from virgin <strong>and recycled materials</strong>. </div> <div class="e_p"> Recycling process for RECYCLAMINE 301-SuperSap300 epoxy/8-ply T300 carbon fiber twill fabric laminate. SOURCE: Fig. 2, “Recycling treatment of carbon fibre/epoxy composites …,” </div> <div class="e_p"> Composites Part B 104 (2016) 17-25, by </div> <div class="e_p"> Gianluca Cicala, S.D. La Rosa, A. Latteri, R. Banatao, S. Pastine. </div> <div class="e_p"> <strong>The Recycling Process</strong> </div> <div class="e_p"> RECYCLAMINE hardeners feature amino end groups connected by a central group, which is where cleavage of the cured epoxy cross-links is achieved with <strong>temperature (70-100°C) and pH (acidic)</strong>. The composite laminate is placed into hot vinegar, and after 1-3 hours (time depends upon temp.), the <strong>resin is dissolved away from the fiber</strong>, maintaining the original architecture without degradation or loss of fiber length. The fiber is dried and ready for reuse, while the epoxy is collected as a thermoplastic material <strong>akin to a stiff polyamide</strong> but with reportedly exceptional adhesive properties. </div> <div class="e_p"> <strong>HP-RTM, Recycle, HP-RTM</strong> </div> <div class="e_p"> The project completed by Fraunhofer Project Center for Composites Research (FPC, London, Ontario, Canada) and the Dept. of Polymer Engineering at the Fraunhofer Institute for Chemical Technology (ICT, Pfinztal, Germany) aimed to demonstrate <strong>cradle-to-cradle recycling</strong> of a thermoset composite made using HP-RTM. </div> <div class="e_p"> A <strong>series of 0.5 m² panels</strong> were fabricated using RECYCLAMINE 101 hardener with Entropy Resin’s (Hayward, CA, US) SuperSap 300 bio-epoxy. Unidirectional carbon fiber preforms supplied by SGL (Wiesbaden, Germany) were placed into a heated mold, resin was injected and cured, and parts were demolded for testing. </div> <div class="e_p"> SOURCE: Fig. 2 and 3, “Recyclable HP-RTM molding epoxy systems and their composite properties”, CAMX 2016. </div> <div class="e_p"> Mechanical testing of the panels made with <strong>virgin and recycled preforms</strong> showed all moduli values (tension, compression, flexure) to be nominally the same and <strong>no significant difference</strong> in 0º panel properties. There was a 10-20% decrease in 90º panel strength and corresponding failure strain, which is believed to be due to sample handling during recycling. </div> <div class="e_p"> SOURCE: “Recyclable HP-RTM molding epoxy systems and their composite properties”, CAMX 2016. </div> <div class="e_p"> <strong>Italian HP-RTM Studies</strong> </div> <div class="e_p"> The second set of projects was conducted by the University of Catania (Catania, Italy), Dept. of Civil Engineering and Architecture (DICAR) with findings published in Volume 104 of the journalComposites Part B. </div> <div class="e_p"> <strong>HP-RTM panels</strong> were made with eight plies of a 190 gsm twill fabric from T300 carbon fiber supplied by Prochima (Calcinelli di Saltara, Italy) in a biaxial layup [0/90]₈ and SuperSap 300 epoxy resin with RECYCLAMINE 301 hardener. They were molded using HP-RTM technology developed by Cannon-Afros (Saronno, Italy). </div> <div class="e_p"> The composite laminates were tested with the following results: </div> <ul> <li> DSC characterization: <strong>Tg of 100°C</strong> </li> <li> DMA characterization: <div class="e_p"> <strong>Tg of 88°C</strong> after 5-min cure at 120°C </div> <div class="e_p"> <strong>Tg of 102°C</strong> after 1hr- post-cure at 120°C </div> </li> <li> Tensile strength: <strong>580 MPa</strong> </li> <li> Modulus: <strong>23 GPa</strong> </li> <li> Elongation to break: <strong>3.33%</strong> </li> </ul> <div class="e_p"> Composite laminate samples were <strong>recycled</strong> in a 25 vol % <strong>acetic acid solution at 80°C for 1.5 hours</strong>. Scanning electron microscope (SEM) analysis showed <strong>no significant difference</strong> between virgin and recycled fibers and that chemical treatment does produce clean fibers with no damage. </div> <div class="e_p"> The <strong>thermoplastic polymer recovered</strong> is described as a poly-hydroxyamino ether (PHAE) with a Tg of 79.5°C obtained via DSC and a tensile strength of 55 MPa and modulus of 2.4 GPa obtained from testing per ASTM D638. </div> <div class="e_p"> The virgin and recycled materials were determined to be <strong>suitable for automotive structural applications</strong> and <strong>processed well using HP-RTM</strong>. A baseline life cycle analysis (LCA) was established with the next step to incorporate results from recovery and re-use of the epoxy thermoplastic. Once this is complete, the LCA will be updated and a life cycle cost (LCC) analysis of the recycling process will be carried out. </div> <div class="e_p"> <strong>Hybrid Carbon and Natural Fiber Composites</strong> </div> <div class="e_p"> Further work demonstrating RECYCLAMINE with hybrid laminates of carbon and natural fibers was presented at <strong>CAMX 2016</strong>. The same resin and carbon fabrics from above were combined with a Biotex 400 gsm twill <strong>flax fiber fabric</strong> from Composites Evolution (Chesterfield, UK). Panels were fabricated using <strong>HP-RTM</strong> and <strong>vacuum-assisted resin transfer molding</strong> (VARTM) and then tested. VARTM panels were cured at room temperature for 6 hours with a 1-hr post-cure at 120°C. </div> <div class="e_p"> Test results, omega-shaped HP-RTM mold and hybrid sample composition. </div> <div class="e_p"> SOURCE: “The use of recyclable epoxy and hybrid lay up for biocomposites: technical and LCA evaluation,” by Gianluca Cicala, A.D.La Rosa, A.Latteri, R.Banatao, S.Pastine, CAMX 2016. </div> <div class="e_p"> <strong>Cured laminates</strong> were then soaked in <strong>acetic acid at 80°C for 3 hours</strong> until matrix was fully dissolved and fibers were clean. Both natural and carbon fiber reinforcements were recovered and analyzed with <strong>no detected degradation</strong>. Thermoplastic epoxy recovered tested per ASTM D790 showed a tensile strength of 42.3 MPa and modulus of 2.85 GPa. </div> <div class="e_p"> IPCC GWP indicator analysis for different end of life options for 8-ply carbon fiber laminates. </div> <div class="e_p"> SOURCE: Fig. 11, “The use of recyclable epoxy and hybrid lay up for biocomposites: technical and LCA evaluation,” by Gianluca Cicala, A.D.La Rosa, A.Latteri, R.Banatao, S.Pastine, CAMX 2016. </div> <div class="e_p"> An <strong>LCA</strong> was performed with the <strong>8-ply all-carbon laminates</strong> having the most environmental impact. Compared to landfill(yellow)and incineration(red), the <strong>RECYCLAMINE-enabled chemical recycling</strong> method demonstrated (green)offers a <strong>60% improvement</strong> in global warming potential (GWP) using the carbon dioxide equivalents (CO₂e) established by the Intergovernmental Panel on Climate Change (IPCC) in 2014. </div> <div class="e_p"> Connora will continue this work in its Phase II SBIR awarded October 2016, specifically analyzing the performance of RECYCLAMINE composites in HP-RTM. Stay tuned for future updates. </div> </div> </div>